Skip to main content
0.00 OutOfStock

Shock Doctor Gel Max Mouthguard

This product is no longer available.

loading

Overview

The Gel Max mouthguard delivers essential protection and comfort. This triple-layer mouthguard provides a universal fit for all ages.

  • Exoskeletal Shock Frame
  • Integrated Breathing Channels
  • Triple-layer design
  • Easier to fit
  • Gel-Fit 
  • Boil and Bite Fit

Fitting Instructions:

  1. Fill a saucepan with 3 to 4 inches of water. Bring water to a boil.
  2. Remove water from the heat source. Let water stand for 30 seconds, then place mouthguard in water for 75 seconds. Do not exceed 90 seconds.
  3. Carefully remove mouth guard from hot water with a slotted spoon.
  4. Cool mouthguard under tap water for 1-2 seconds only to bring the surface temperature to a comfortable level.
  5. Lick your lips before placing the mouthguard in your mouth.
  6. Watching in mirror, line up mouthguard carefully with the centerline of upper teeth. Fit mouthguard onto and around upper teeth and press firmly into molars first then front teeth.
  7. Bring lower jaw forward and up into the base of mouthguard with teeth in alignment with lower channel. Bite down hard on the mouthguard, suck in strongly, and use fingers to press edges of mouth guard into teeth and gum line through lips and cheeks for 20 seconds.
  8. Remove the mouthguard and cool under tap water for 30 seconds. Replace into mouth and test for a good, firm fit.
  9. Repeat steps 1 through 8 if the fit is not accurate.

NOT FOR USE WITH BRACES

Related Guides and Advice

loading