Skip to main content
0.00 OutOfStock

Shock Doctor Gel Max Power Fangs Mouthguard

This product is no longer available.

loading

Overview

High-profile comfort and protection in a low-profile design. Gel Max Power features a tight, natural fit and a reinforced inner grid worthy of any sport.

Power ON. Redesigned Monoque Chasis Integrated Inner Grid Triple Layer Technology MORA Performance Enhancement Convertibale Tether Gel-Fit Liner Boil and Bite Fit.

Fitting Instructions

1. Fill a saucepan with 3 to 4 inches of water. Bring water to a boil.

2. Remove water from heat source. Let the water stand for 30 seconds, then place mouthguard in the water for 60 seconds. Do not exceed 60 seconds.

3. Carefully remove mouthguard from hot water with a slotted spoon.

4. Cool mouthguard under tap water for 1-2 seconds only to bring the surface temperature to a comfortable level.

5. Lick your lips before placing mouthguard in your mouth.

6. Watching in the mirror, line up mouthguard carefully with the centerline of upper teeth. Fit mouthguard onto and around upper teeth and press firmly into molars first then front teeth.

7. Bring the lower jaw forward and up into the base of mouthguard with teeth in alignment with the lower channel. Bite down hard on mouthguard, suck in strongly, and use fingers to press edges of mouthguard into teeth and gum line through lips and cheeks for 20 seconds.

8. Remove mouthguard and cool under tap water for 30 seconds. Replace into mouth and test for a good, firm fit.

9. Repeat steps 1 through 8 if the fit is not accurate.

 

  • NOT FOR USE WITH BRACES

Related Guides and Advice

loading